Snow Cleaners and Janitors

Removing snow and ice mitigation is performed daily for site access and safety reasons. It entails primarily less-skilled manual labor including shoveling, sweeping, or using snow blowers to move excess snow from the construction site. Most areas where work is actually being performed must be cleaned manually because larger equipment will not fit, is too heavy or too large and powerful and may risk damaging current construction. On rare occasions, more skilled workers may use trucks with a snow-blade and/or a skid loader for larger areas and/or site ingress and egress areas. The snow cleaners will have to store, maintain and place the chains on the truck and skid loader tires when conditions are slick from snow and ice. Snow shelters are used on concrete construction sites to keep the temperatures high so that concrete can properly set when the outside temperatures are cold. Snow shelters are erected by snow cleaners under the supervision of the foremen, using basic materials such as two-inch by four-inch or four-inch by four-inch lumber that is fastened together temporarily and covered with reinforced plastic or canvas. Once covered, diesel heaters will pump warm air through hoses into the shelters long enough for the concrete to properly set. The snow shelters are erected following a basic, repetitious pattern and the lumber is preserved and used again if possible. Snow cleaners will also cover concrete with water hoses, heavy blankets and tarps to keep the concrete warm an